R&D

Research details
Research equipment status

Research equipment status

  • Power Heat Treatment Equipment
  • Sintering Furnace
  • CIP(Cold Isostatic Press)
  • Grinding Machine
Process Facilities
  Equipment Quantity Specifications Applications
Powdering
Process		 Jaw Crusher 1
  • Inlet Port Size : 100X100mm
  • Crusher : Tungsten carbide (WC91-Co9)
  • Max. Charge Size : 95 mm
  • Max. Circulation Volume : 200kg/hr
  • Gap Interval(1-10 stage) : 1-15mm
  • Crush solid and bulk products
Planetary Mill 1
  • Volume : 6L(15x4set) ball mill
  • Feed Size : 10mm
  • The particle size : <0.1um Speed milling
  • Tank : 800rpm
  • Roll speed 12rpm with milling pot : 4x15L
  • stainless tanks
  • Power : 220VAC, 50Hz, 0.75kW
  • Out size : 1040x730x720
  • Fill a spherical ball in a cylinder and insert a solid particle to rotate a cylindrical ball-mill.
  • The solid particles and the balls collide with each other, and the metal particles are crushed and the particles are finely crushed.
  • Powder alloying and particle milling
Powder Mixer 1
  • Motor Output : 0.75kW
  • Voltage : 380V3P50Hz
  • Rotation speed : 15rpm/min
  • Size : 500x1150x950
  • For Powder Alloying Process
Pre & post
tretment Process		 Tube-type
Electric Furnace		 3
  • Heating : Max 1,000℃
  • Operation Type : Air Cylinder Push Type
  • Atmophere : N2, H2
  • Heating Zone : 100Ax3000L
  • Powder manufacturing and product plasticizing
  • Hydrogen and nitrogen atmophere
Large Hot Air Dryer 1
  • MAX TEMP : 150℃
  • Temperature control : Ambient temperature~150℃
  • Temperature Range : around 1℃
  • Scrap recycling process
Rotating Hot
Air Dryer		 1
  • Internal Chamber Rotating Dryer
  • Max : 150℃
  • Scrap recycling process
Vibratory Washer 1
  • Motor Output 2kW
  • Oil Skimmer : SMT-A-40 1set
  • Voltage : 220V
  • Vibrator : JEP-215
  • Size : 500x500x300
  • Scrap recycling process and product cleaning
Vertical
Turning Lathe
  • Table Diamete : Φ1200
  • Swing : Φ1600
  • Max. Processing Height: 1030mm
  • Product processing
Large Lathe 1
  • 4 original ruler diameter: Φ850
  • Max. Processing Height: 1500L
  • Swing : Φ1100
  • Type : Inner/outer diameter processing lathe
  • Product processing
Manual Lathe 1
  • Swing : Φ600
  • Max. Processing Length : 2000L
  • Product processing
Molding Process Cold Isostatic Press 1
  • Max. Pressure: 2500Bar
  • Inner Size : Φ700x1500L
  • Cold isostatic pressing machine for powder molding
Sintering Process High Temperature
Sintering Furnace		 1
  • Heating : Max 2,300℃
  • Hot Zone : Φ600x700L
  • Hydrogen atmophere Large-scale high-temperature sintering furnace
Analysis Equipment
  Equipment Quantity Specifications Applications
Surface
Roughness		 Surface Roughness Meter 1
  • Ra0.001~350um
  • Portable surface roughness meter
Physical Properties Particle Size Analyzer(FSSS) 1
  • 0.1~100um
  • Dry Average Particle Size Measurement Equipment
Radiation Thermometer 1
  • Temperature Range : 600~3000℃
  • Radial ultra-high temperature measuring equipment
Tab Density Meter 3
  • AC220V
  • Stroke : 6mm
  • Mass-Cylinder : 50ml
  • Tap density measurement equipment of powder
Scott Density Meter 1
  • Powder Density Tester
  • Scott density measurement equipment of powder
Large Scale 1
  • Min. measurement weight : 10g
  • Max. measurement weight : 600kg
  • High resolution, heavy weight high-precision electronic scales
Precision Scale 1 1
  • Min. measurement weight : 0.01g
  • Max. measurement weight : 6000g
  • 1/100g resolution precision electronic scales
Precision Scale 2 1
  • Min. measurement weight : 0.001g
  • Max. measurement weight : 600g
  • 1/1000g resolution precision electronic scales